How it works: Step by step:

1. Fill the chamber with water as demonstrated in picture one. A marker is on the side of Miss Softie, fill water until it reaches this mark. The new Miss Softie only has to be filled once. Make sure the water is in both chambers and warm, not hot. The ideal temperature is 37-38 degrees Celsius.
 

2. To get rid of excess air in the bag, squeeze the bag with your hand just below the marker. Miss Softie should be swollen and firm rather than air filled and sloppy. With your hand still applying pressure to keep air from coming in, twist the bag to seal it. Just as shown in picture two.
 

3. Now to seal it permanently, tie a knot, as shown in picture three.
 

4. Step four is to apply lubrication to Miss Softie. Be generous with lubrication, both inside the cavity and around the slit. Enjoy!
 

5. After usage pierce Miss Softie with a sharp object to empty her of water.
 

6. To avoid plumbing disorders throw Miss Softie in the bin, instead of flushing her down the toilet.